The products of white latex manufacturers are required to be environmentally friendly and must not contain excessive harmful gases to avoid affecting health. The requirements for using white latex adhesive are also relatively high.

Do not use white latex adhesive in places where the temperature exceeds 60 degrees. If it must be used outdoors, the adhesive must be allowed to dry and cure fully, which generally takes 72 hours. When applying directly outdoors, necessary sun protection measures should be taken, and the adhesive should only be used after it has fully dried and cured. When storing and transporting white latex adhesive, keep it away from fire and heat sources, and avoid direct sunlight. Store and transport it as a flammable material. After use, take care to prevent fire in empty packaging buckets. After applying the adhesive, it is advisable to let it dry for 10-15 minutes, with the time extended in winter.

White latex adhesive may sometimes become cloudy, which is mainly due to the effect of humid weather. The adhesive absorbs moisture from the air, causing rust at the weld points of the adhesive bucket and even leading to cloudiness in the adhesive color. Therefore, it should be stored in a dry and well-ventilated place.