What effects will occur if white latex adhesive is too thick?

The consistency of white latex adhesive also needs to be controlled. White latex adhesive has very good adhesion, and as for white latex adhesive, its usage method is very simple, almost everyone knows how to use it. Why does the consistency of white latex adhesive need to be controlled? If too much white latex adhesive is applied and it is too thick, there will be certain effects. So, what effects will occur if white latex adhesive is too thick? Follow the white latex adhesive manufacturer to find out.

If the white latex adhesive is too thick, it will be difficult to dry and have poor adhesion. Because the viscosity of the adhesive is greatly affected by temperature. The lower the temperature, the lower its fluidity, making it difficult to brush on, and the adhesive layer will be thicker. The solvent on the surface of the adhesive evaporates and forms a film. When you touch it with your hand, it feels dry, but the inside is actually still not completely dry. If bonding is done at this time, a series of chain reactions such as poor adhesion, stringing, and popping open will inevitably occur. This is why some items have good initial adhesion but fall off later.
Therefore, when applying white latex adhesive, we should apply it thinly, evenly, and allow it to dry completely. It is best to ensure that the temperature of the adhesive surface during bonding is around 38 degrees Celsius.