Someone told the white latex adhesive manufacturer that sometimes whitening occurs during the use of white latex adhesive. Why is this?

The whitening phenomenon of white latex adhesive is the appearance of a white fog on or around the bonded area after the adhesive has been bonded. However, if the whitening phenomenon is not severe and the film is thin, it is generally difficult to detect. Therefore, if the film thickness is thick, the whitening phenomenon is more severe. The faster the curing speed of white latex adhesive, the smaller the whitening phenomenon. The whitening phenomenon is affected by the curing speed of the, which in turn is affected by the material itself and the low-temperature, dry environment.

Therefore, the solution to the whitening phenomenon is to choose high-quality white latex adhesive, pay attention to the glue application environment, try to apply glue in a dry, well-ventilated environment, ensure that hands are dry during operation, and ensure that there are no sweat stains or water stains.