This product from the white latex adhesive manufacturer can be used in daily decoration settings, and the effect is very good. What details need to be paid attention to when using it?

Depending on the use, white latex adhesive can be diluted with water, but it needs to be heated to above 30°C and slowly mixed before use. Note that it cannot be diluted with cold water below 10°C, and it should be stirred evenly when used. Adding a small amount of hydrochloric acid before use can increase the curing speed. Due to the viscosity of the adhesive, when applying the adhesive, you should use a manual gluing machine or rubber scraper to apply the glue evenly. After the workpiece is coated with adhesive, the workpieces should be connected together as soon as possible to prevent film formation on the adhesive surface, avoiding connection errors and the glue easily opening.

White latex adhesive is still very simple to operate, with fast curing speed and high bonding strength. When not in use, avoid contact with skin and eyes, and maintain good ventilation to keep its performance good.