A brief discussion on precautions for using white latex adhesive and the current market situation.

1. During bonding operations, the use temperature should not be lower than 7 degrees. Above 95 degrees, it cannot withstand high temperatures, which will reduce the strength of the adhesive layer.
2. White latex adhesive can be diluted with water according to different uses, but it must first be heated to above 30 degrees, then water above 30 degrees should be slowly added with stirring until均匀 before use. Do not dilute with cold water below 10 degrees.
3. After starting to use it, the lid should be tightly sealed. To prevent skin formation, a layer of water can be sprinkled on the surface, and it should be stirred evenly when used. Adding a small amount of hydrochloric acid before use can speed up the curing rate.
4. It can be mixed and prepared with other hydrophobic resins to improve the product's bonding strength, water resistance, heat resistance, and shorten the curing time.
5. White latex adhesive is generally safe, but it should not be swallowed or splashed into the eyes. If touched to the mouth or eyes, immediately rinse with plenty of clean water.
6. Do not pour the white emulsion into rivers or drains to avoid pollution or sewer blockage. After use, store it statically, and after drying and forming a film, dispose of it as solid waste.
7. Storage and transportation: It must be stored in a cool, dry environment with a temperature above 5°C. The shelf life in a sealed container is more than 12 months. Store and transport lightly, place gently, prevent inversion, crushing, and sun exposure.
8. The characteristics and fire hazards during operation of the main raw materials such as polyvinyl alcohol, vinyl acetate, acrylic acid, and ammonium persulfate in the production of white latex adhesive are introduced. Key points of fire protection design in the production area are emphasized, including process procedures, white latex adhesive factory fire prevention, tank area fire prevention, and automatic fire protection facilities.

Current market:
White latex adhesive is one of the most used adhesives in decoration. white latex adhesive is a water-soluble adhesive emulsion made with vinyl acetate as the main raw material through a series of chemical processes.

It is widely used in furniture manufacturing, wood processing, building decoration, leather, printing binding, paper-plastic lamination, fabric finishing, tobacco manufacturing, coating emulsions, and is mixed with cement mortar for exterior walls, surface repair, wall joint filling, and for blockboard splicing, veneer repair, plywood repair, and secondary processing of artificial boards.

The market for counterfeit and shoddy building materials is the most prominent problem in the current Chinese building materials market. It has to be said that this is a sorrow for the entire Chinese building materials market, not only causing great harm to manufacturers but also to the health of consumers.

In China, the white latex adhesive market is a microcosm, and it is ultimately difficult to eliminate counterfeit products. People know that white latex adhesive is a petroleum derivative, and its cost is related to oil prices. However, counterfeiters mix starch and other substances into genuine products, or even use starch directly, which can greatly reduce costs, but the is not ideal.