When using white latex adhesive, we need to pay attention to many aspects, such as temperature. If the temperature is too high or too low, bonding operations should not be carried out.

Generally speaking, the minimum temperature should not be lower than 7 degrees Celsius, and the maximum temperature should not be higher than 95 degrees Celsius; otherwise, the bonding strength of the adhesive layer will decrease, or bonding may not be completed at all. If diluting white latex adhesive with clean water, you should also pay attention to the surface temperature. Before dilution, ensure that the surface temperature of the white latex adhesive exceeds 30 degrees Celsius, and the temperature of the added water should also be above 30 degrees Celsius. Do not dilute with water below 10 degrees Celsius. If a small amount of white latex adhesive accidentally gets into the mouth or eyes, it needs to be immediately rinsed with a large amount of water to minimize damage.

White latex adhesive needs to be stored in a dry, cool environment. For white latex adhesive that has been opened, if it cannot be used all at once, it is necessary to sprinkle a layer of water on its surface to avoid skinning, and then store it strictly.