White latex adhesive is a single-component quick-curing adhesive synthesized by manufacturers using production technology, with characteristics such as high strength, good bonding effect, and fast room-temperature curing.

White latex adhesive is simple to operate, has a fast curing speed, a wide bonding range, and high strength. When using quick-drying adhesive, pay attention to avoiding contact with skin and eyes, and maintain good ventilation. Depending on the use, white latex adhesive can be diluted with water, but it needs to be heated to above 30 degrees Celsius and slowly mixed before use. Do not dilute with cold water below 10 degrees Celsius. Stir evenly when using. Adding a small amount of hydrochloric acid before use can increase the curing speed.

Due to the viscosity of the adhesive, when applying glue, still use a manual gluing machine or rubber scraper to apply evenly. After the workpiece is coated with adhesive, the workpieces should be connected together as soon as possible to prevent film formation on the adhesive surface, avoiding false bonding and easy glue line opening.