Woodworking adhesive manufacturer teaches you how to improve bonding reliability.

1. After applying woodworking adhesive to the substrate, mechanical reinforcement such as metal fasteners, patch blocks, nesting, screw riveting, sleeves, dowel pins, spot welding, etc., can be used, essentially combining with continuous bonding.

2. At the location where woodworking adhesive is applied, glass fiber, glass cloth, etc., can be wrapped around so that after curing, the bonded area forms fiberglass, increasing structural strength.

3. At the woodworking adhesive bonding position, methods such as adding rivets, widening, thickening, corner wrapping, edge banding, etc., can be added later to improve the peel strength of the bond.

4. Using chemical methods to surface-treat the woodworking adhesive joint can greatly improve the durability and strength of the bond.

5. Heating the woodworking adhesive bonding area, such as with a hair dryer, ultraviolet lamp, etc., can increase the degree of cross-linking, improving bonding strength and creep resistance.

6. The exposed area of the woodworking adhesive joint should be waterproofed with materials such as silicone resin to avoid moisture corrosion and extend the service life of the bonded components.