White latex adhesive manufacturers tell us that when using white latex adhesive, we should clean the substrate, as contaminants such as oil, water, and dust are not allowed.

When applying by hand, use a brush to evenly apply white latex adhesive to the surface of one of the materials, and press the other material together to bond. Then use clamps, tape, etc., to press and fix the two materials together. After 2 hours, the materials will be positioned, and complete curing takes 24 hours. The curing and setting of white latex adhesive will be affected by indoor temperature and humidity. When used under low-temperature, high-humidity conditions, the positioning and complete curing time will increase; when used in a dry, well-ventilated environment, the time will shorten.

When using white latex adhesive, also pay attention not to add water to dilute the white latex adhesive to save costs, as this will affect the bonding effect.