When decorating a house, friends who use white latex adhesive may encounter problems more or less. Because of humid weather, many household items deteriorate due to humidity, and white latex adhesive can also be affected, impacting its use. It has been raining continuously these days, and someone asked whether white latex adhesive becomes moldy after drying and how to deal with moldy white latex adhesive. A Hebei white latex adhesive manufacturer will tell you.

After the white latex adhesive sets, mold may be found. However, the reason white latex adhesive molds is that it is in a dark, humid environment for a long time, which causes the starch in the white latex adhesive to mold within the protein structure. If white latex adhesive becomes moldy, please replace the moldy white latex adhesive as soon as possible, because some moldy white latex adhesive contains mold spores. Once they circulate in the air, they are harmful to human health. The main symptoms are: they can cause respiratory diseases and allergic reactions, and in severe cases, may also cause headaches and fever. How to deal with some moldy white latex adhesive?

1. If you just see mold spots on the wall, you can use a dry toothbrush to remove the mold spots, then disinfect with alcohol to prevent regrowth.

2. If the mold situation is not very serious, you can choose to wash the wall with 80% alcohol. During the operation process, the main considerations include indoor ambient space, ventilation, and self-protection.

3. If the above two methods are relatively complicated and troublesome, you can choose to use a spray to remove it. The mixing ratio is bleach and water added at 1:99, then shake. After spraying the wall, clean it with clean water.

4. There is a method to keep the wall dry, especially when the weather is humid: try to open windows as little as possible, and you can also use a fan to absorb moisture from the wall.

In summary, white latex adhesive can become moldy, but the main reason for mold is inadequate protection. After mold appears, the moldy white latex adhesive should be dealt with. However, it is very important to pay attention to daily protection.