Lichao construction white latex adhesive manufacturer introduces precautions for white latex adhesive.

1. Pay attention to temperature. When using white latex adhesive, there are certain temperature requirements. If the temperature is too high or too low, it is not suitable for bonding. Generally, the minimum temperature should not be less than 7 degrees Celsius, and the maximum temperature should not be higher than 95 degrees Celsius; otherwise, the bonding strength of the surface layer will decrease, and bonding may not even be possible. In addition, if diluting white latex adhesive with clean water, you must also pay attention to the surface temperature. Before dilution, the surface temperature of the white latex adhesive must exceed 30 degrees Celsius, and the temperature of the added water should also be above 30 degrees Celsius. Do not use water below 10 degrees Celsius for dilution.

2. Pay attention to application safety. Although high-quality white latex adhesive does not easily form harmful substances during the application process and is an energy-saving product, it is ultimately a chemical material, so it is still necessary to prevent splashing into the eyes or accidental ingestion, as it can otherwise cause great harm to physical and mental health. If a small amount of white latex adhesive accidentally gets into the mouth or eyes, you must immediately use a large amount of water to clean it to minimize damage.

3. Pay attention to storage methods. White latex adhesive must be stored in dry, cool conditions. Generally, the temperature should not be less than 5 degrees Celsius. In addition, for white latex adhesive that has been opened, if it is not used up at once, you must sprinkle a layer of water on its surface to prevent film formation, and then store it strictly. A small amount of sulfuric acid can be appropriately added before use again, then thoroughly stirred evenly.

Lichao construction white latex adhesive manufacturer reminds you again: Due to its unique properties and characteristics, white latex adhesive is very widely used, but there are still some matters to pay attention to during the application process to prevent affecting the bonding effect. In addition, due to the large market demand, counterfeit and shoddy products of white latex adhesive are also relatively common at present, so you also need to avoid fake and inferior products when purchasing.