Discussion on precautions for using white latex adhesive and the current state of the industry.

1. During bonding operations, the use temperature should not be lower than 7 degrees Celsius. Above 95 degrees Celsius, it cannot withstand high temperatures, which will reduce bonding strength.

2. White latex adhesive can be diluted with water for different uses, but it must first be heated to above 30 degrees Celsius, then water above 30 degrees Celsius should be slowly added with stirring until uniform. Do not dilute with cold water below 10 degrees Celsius.

3. After widespread use, the lid should be tightly sealed. To avoid skin formation, a layer of water can be sprinkled on the surface, and it should be stirred evenly when used. Adding a small amount of sulfuric acid before use can speed up the curing rate.

4. It can be mixed with other hydrophobic resins to improve the product's bonding strength, water resistance, and heat resistance, and shorten the setting time.

5. White latex adhesive is generally safe, but it should not be swallowed or splashed into the eyes. If touched to the mouth or eyes, immediately rinse with plenty of clean water.

6. Do not pour white latex adhesive into rivers or drains to avoid pollution or sewer blockage. After use, store it statically, and after the film dries, dispose of it as solid waste.

7. Storage and transportation: It must be stored in a cool, dry environment with a temperature above 5 degrees Celsius. The shelf life in a sealed container is more than 12 months. Store and transport lightly, place gently, prevent falling, squeezing, and sun exposure.

8. The characteristics and fire risks of main raw materials such as polyvinyl alcohol, vinyl acetate, acrylic acid, ammonium persulfate, etc., in white latex adhesive production. Key points of fire protection design in the production area are introduced, including process procedures, white latex adhesive factory fire prevention, tank area fire prevention, and automatic fire protection facilities.

Current market:

White latex adhesive is one of the most used adhesives in decoration. Conventional white latex adhesive is a water-soluble adhesive emulsion made with vinyl acetate as the main raw material through a series of chemical processes.

It is widely used in furniture manufacturing, solid wood processing, building decoration, leather, printing binding, paper-plastic lamination, fabric finishing, tobacco manufacturing, coating emulsions, cement mortar for exterior walls, decoration, wall gap filling, for blockboard splicing, veneer repair, panel repair, and secondary processing of artificial boards.

The market for counterfeit and shoddy building materials is the most prominent problem in the Chinese building materials market. It has to be said that this is a sorrow for the entire Chinese building materials market, not only causing great harm to manufacturers and consumer health.

In China, the white latex adhesive market is a microcosm, and it is ultimately difficult to eliminate counterfeit products. As we all know, white latex adhesive is a petroleum derivative related to oil prices, but counterfeit and shoddy products mix starch and other substances into genuine products, or even use starch directly, which can greatly reduce costs, but the results are not ideal.