Here is the detailed step-by-step guide on how to use white latex adhesive, commonly used in furniture making, decoration, paper processing, and other fields:

1. Preparation: First, ensure the surfaces of the materials to be bonded are clean, dust-free, and oil-free. You can use sandpaper to roughen the surfaces to increase adhesion. Also, prepare tools such as white latex adhesive, a brush or roller.

2. Mixing the adhesive: Pour the white latex adhesive from the container into a mixing vessel. Stir it thoroughly with a mixing rod. Be careful not to over-mix, as this could make the adhesive too thin.

3. Applying the adhesive: Use a brush or roller to evenly apply the mixed white latex adhesive onto both surfaces to be bonded. When applying, control the thickness of the adhesive layer, avoiding it being too thick or too thin. Generally, the adhesive thickness should be kept between 0.1 and 0.5 millimeters.

4. Pressing and fixing: Align the two surfaces coated with adhesive and press them firmly together. You can use clamps or other tools to hold them in place to prevent movement during the drying process.

5. Drying and curing: Place the bonded materials in a well-ventilated area and allow the adhesive to dry naturally. The drying time depends on the ambient temperature and humidity, typically requiring more than 24 hours. During the drying process, avoid direct sunlight and high temperatures, as these can affect the adhesive's performance.

6. Quality check: Once the adhesive is completely dry, check whether the bonded area is strong and smooth. If necessary, you can trim the area or reapply the adhesive.