White latex adhesive produced by white latex adhesive manufacturers is mainly suitable for bonding various wood, fiber, paper, leather, etc. Let's take a look at its precautions.

Note: The bonding surface should be dry, free of dirt and wood debris. White latex adhesive should be applied thinly and evenly on one side of the bonding surface, then the two bonding surfaces should be pressed and clamped together. For bonding surfaces that will bear greater stress, the time after bonding should be appropriately increased, and no water should be added. Initial bonding requires drying for 2 to 3 minutes. Drying time: at a temperature of 25°C to 30°C, drying time is 30 to 90 minutes. In winter, low temperature drying requires 2 to 3 hours. Strength testing should be done after 24 hours. The construction environment temperature is 10°C to 40°C. When bonding products, the drying temperature should not exceed 120°C. Shelf life: 12 months. The product is non-toxic and non-flammable. It should be stored in a room temperature, well-ventilated, dry warehouse, and the storage temperature should be kept above 0°C. During transportation, do not invert, expose to rain, or expose to direct sunlight. In winter, transportation should be carried out above 0°C, taking care to prevent freezing and sun exposure.