Because white latex adhesive is an environmentally friendly and healthy bonding product, it is widely used. However, there are many precautions that need to be followed during use. Let the white latex adhesive manufacturer introduce them to you.

During bonding operations, the application temperature should not be lower than 7°C. It is not heat resistant; exceeding 95°C will cause a decrease in bonding strength. Depending on the different applications, this product can be diluted with water, but the water temperature should exceed 30°C. Water above 30°C can be slowly mixed in until uniform before use. Cold water below 10°C should not be used for dilution. After starting to use it, the white latex adhesive container should be strictly covered. To prevent film formation, a layer of water can be sprinkled on top, then stirred evenly. Before use, adding a small amount of sulfuric acid can increase the curing rate. It can be mixed with other water-repellent resins to form a two-component product, improving bonding strength, water resistance, and heat resistance, while reducing curing time.

Do not pour this product into riverbanks or sewers to prevent pollution or sewer blockage. After use, waste should be left to stand, and after it dries and forms a film, it should be disposed of as solid waste.

The white latex adhesive manufacturer reminds you that when storing white latex adhesive, it should be placed in a cool, dry place at a temperature of 5°C to ensure the quality and service life of the white latex adhesive.