White latex adhesive manufacturers remind us that when using white latex adhesive, construction should be carried out in a specially designated glue injection room, which requires being kept clean, free of dust, and free of ignition sources.

If you want to clean the injection points of white latex adhesive, you should also strictly follow the requirements of standards, design drawings, and process procedures. It is necessary to use auxiliary materials such as cleaning agents, cleaning cloths, and protective tape. For non-oily contaminants, a mixture of isopropyl alcohol and water is generally used. For oily contaminants, xylene solvent is generally used. The cleaning cloth should be clean, soft, non-linting white or natural cotton cloth. Do not dip the cloth directly into the container to prevent contamination of the entire solvent.

After cleaning, be careful not to touch the cleaned areas with hands or other contaminants, otherwise they must be cleaned again.